Tapo C120 Camera multi angle window mounting bracket (No Camera Included)

Tapo C120 Camera multi direction or angle window mounting.

Suitable for indoor or outdoor applications...

The easy convenient way to mount your Tapo Camera to glass using 2 X 40mm diameter extra strong suction pads.

To fit this you will need the supplied white round disk that came with your Tapo C120 in the box and a cross head screw driver to fit the 2 screws supplied with your window mounting bracket.

Place the disk into the top of the window mounting bracket and secure in place with the 2 screws supplied and then place the camera on top. It is kept in place with the magnetism and allows mounting of the camera inverted if required.

To mount the camera find a suitable location and place the camera on top of the mounting bracket.

Avoid mounting your camera in direct sun light on hot days as excessive heat may effect the operation of the camera.

Outdoor Operating Temperature -4° to 113° F (-20° to 45° C)

Indoor Operating Temperature 32° to 95° F (0° to 35° C)

This 3D printed unit comes in white and every thing you need to mount your Tapo C120.

When fitting to your glass surface make sure the glass it is thoroughly clean and that the sucker pads are free from dust or dirt.

To clean the sucker pads remove and wash in soapy water.

This is for the mounting bracket only and does not include any Tapo camera used for demonstration purposes only.

Made and shipped from the UK.